全自動攪拌車幾大問題解答
開全自動攪拌車，對有經驗的駕駛員來說，一般的駕駛常識都會。在此要提醒的是，由于混凝土是流態的，在車輛急轉彎的時候，一定要降低速度，以免混凝土轉彎時產生的離心力使車輛不穩！此外您對攪拌車還需要懂很多，下面全自動攪拌車廠家來為您講解一番。
Driving a full-automatic mixer truck, for experienced drivers, the general knowledge of safe driving is good. It should be reminded here that since the concrete is in a fluid state, when the vehicle turns sharply, the speed must be reduced to avoid the centrifugal force generated by the concrete turning to make the vehicle unstable! In addition, you need to know a lot about the mixer truck. The following fully automatic mixer truck manufacturers will explain it to you.
攪拌車多裝混凝土有哪些影響？
What are the effects of more concrete loading on the mixer truck?
9方以下的攪拌車裝多了混凝土，車子在爬坡過程中會漏灑；12方攪拌車裝多了混凝土，攪拌會分層，混凝土砂率就偏低，石子粒徑偏大，到工地泵送石子多。
If the mixer truck below 9m3 is loaded with too much concrete, the truck will leak during climbing; When the 12 m3 mixer truck loads too much concrete, the mixing will be layered, the concrete sand rate is low, the stone particle size is too large, and the stones are pumped to the construction site.
新攪拌車一般開幾年就比較容易出問題？
A new mixer is usually more prone to problems after a few years of driving?
拉干料一般是五年，濕料一般是七年，一般攪拌車在3年以后容易出現問題，攪拌車的問題與個人保養及生產廠家有很大的關系。
The dry materials are usually pulled for five years, and the wet materials are usually pulled for seven years. Generally, the mixer truck is prone to problems after three years. The problems of the mixer truck are closely related to personal maintenance and the manufacturer.
混凝土凝固在攪拌車里怎么辦？
What if the concrete solidifies in the mixer truck?
混凝土凝固后，其主要成分是硅酸二鈣、硅酸三鈣。理論上講，鹽酸可以與之反應解除其固態形狀。但實際上很難操作，因為攪拌車的料口很小，鹽酸量難以控制，且鹽酸也可以與攪拌車罐體發生反應。實際出現這種情況，往往是用電焊或氣割切開罐體，然后將凝固的混凝土機械破碎。
After the concrete is set, its main components are dicalcium silicate and tricalcium silicate. Theoretically, hydrochloric acid can react with it to release its solid shape. However, it is difficult to operate in practice, because the material inlet of the mixer truck is very small, the amount of hydrochloric acid is difficult to control, and the hydrochloric acid can also react with the tank of the mixer truck. In practice, the tank body is often cut by electric welding or gas cutting, and then the solidified concrete is mechanically broken.
攪拌車上裝指的是什么？
What does loading on mixer truck mean?
攪拌車上裝指的是攪拌車除底盤擋泥板以外的東西，包括攪拌罐體及支座，進出料斗，液壓系統及減速器，水箱及管路，操作連桿機構等。
Loading on the mixer truck refers to the things other than the chassis fender of the mixer truck, including the mixing tank and support, the inlet and outlet hopper, the hydraulic system and reducer, the water tank and pipeline, and the operating link mechanism.
一般攪拌車廠家的液壓系統是國產還是進口？
Is the hydraulic system of general mixer truck manufacturer domestic or imported?
一般廠家會根據攪拌車的大小以及客戶的需求來選裝，6方以下標配為國產系統（可選進口），6方以上標配為進口系統。
Generally, the manufacturer will choose according to the size of the mixer truck and the needs of customers. The standard configuration of less than 6 m3 is domestic system (optional import), and the standard configuration of more than 6 m3 is imported system.
小方量攪拌車的液壓泵是選定量泵好還是變量泵好？
Is the hydraulic pump of the small volume mixer better than the variable volume pump?
液壓泵是攪拌車的主要構件，一般6方以下的攪拌車是標配的定量泵，不過建議客戶選裝變量泵。
The hydraulic pump is the main component of the mixer truck. Generally, the mixer truck with less than 6 cubic meters is the standard quantitative pump. However, it is recommended that the customer choose the variable displacement pump.
攪拌車的焊接工藝是怎樣的？
What is the welding process of the mixer truck?
現在一般廠家都對整個車子的焊接采用全自動無縫焊接，環縫和縱縫均采用全自動無縫焊接。
Now, most manufacturers use full-automatic seamless welding for the welding of the whole vehicle, and the circumferential and longitudinal seams are all fully automatic seamless welding.
攪拌車的付款方式是什么樣的？
What is the payment method of mixer truck?
攪拌車的付款方式有多種，可以全款購車也可以分期付款，全款購車一般廠家會有一定的優惠，分期付款無優惠，且利息與銀行利息持平。
There are many payment methods for mixer trucks, including full payment and installment payment. Generally, the manufacturer will have certain discount for full payment, but there is no discount for installment payment, and the interest is equal to the bank interest.
全自動攪拌車出料費勁怎么辦？除加水外有無更好辦法？
What should I do if it's hard to discharge materials from the full-automatic mixer? Is there a better way to add water?
如果是因為混凝土的原因，那就要看看是坍落度太小還是混凝土強度太高，還是混凝土太黏不好下的原因，以上原因可根據施工要求適當調整一下混凝土；如果總是不好下，就要考慮是否葉片角度和下料口那塊有問題。
If it is due to the concrete, it is necessary to see whether the slump is too small, the concrete strength is too high, or the concrete is too sticky. The above reasons can be adjusted according to the construction requirements; If it is always difficult to unload, it is necessary to consider whether there is a problem with the blade angle and the unloading port.
全自動攪拌車幾大問題的解答內容就到這里了，您對此有什么疑問就來我們網站http://www.pheenet.cn在咨詢看看吧。
This is the end of the answers to several questions of the automatic mixer. If you have any questions about this, please come to our website http://www.pheenet.cn Let's have a look at the consultation.
